Nilfisk-ALTO CLE4.0 - Manual (Page 12)

11
AUDIO INPUT
Active balanced XLR and 1/4"JACK
Balanced: 50K Ohm
Unbalanced: 25K Ohm
alanced and nbalanced: B U +21 dBu
+21 dBu
AUDIO OUTPUT
XLR and 1/4" JACK
Balanced: 60Ohm
Unbalanced: 30Ohm
20Hz to 20KHz at +0,-0.5dB
0.01% typ.1KHz ,@+4dBu
0.04% typ,1KHz ,@+20dBu
0.01% typ
>-90dBu
<-100dB
Interactive Compressor
Variable: from -40dB to +20dB
Variable: from 1:1 to
:1
Typ. 15ms at 10dB; 5ms at 20 dB; 3ms at 30dB
Typ. 125dB/s
Variable: from -20 to +20dB
Interactive Peak Limiter
Variable: from +4dB to OFF
:1
Clipper
zero
Program Limiter
typ. <5ms
typ. 20dB/s
Internal reference level: from +4dBu to -10dBV
Bypass switch
Allows for frequency dependent detection
Enables the ` Smart Knee Control `
characteristics
Switches input and output for the level meter
Linking CH1 (master) and CH2 CH3 (master)
and CH4; stereo operation
6. TECHNICAL SPECIFICATIONS
+4dBu /-10dBv
>55dB @1KHz
COMPRESSOR
SECTION
PEAK LIMITER
SECTION
FUNCTION
SWITCHES
INDICATORS
POWER SUPPLY
DIMENSIONS
WEIGHT
POWER
CONSUMPTION
Type
Impedance
Maximum input level
Type
Impedance
Maximum output level
Bandwidth
THD +N%
IMD
Noise
Crosstalk
Type
Threshold
Ratio
Auto Attack Time
Auto Release Time
Output
Type
Threshold
Ratio
Stage 1:
Attack and Release
Stage 2
Attack
Release
OPERATING LEVEL
BYPASS
CONTOUR
SMART
I/O METER
COUPLE
Operating Level
CMRR
GAIN REDUCTION: 8 element LED
INPUT / OUTPUT LEVEL: 8 element LED
PEAK LIMITER THRESHOLD: 1 element LED (Limiter Function )
Function switch: LED indicator for each
483 (W) 194.5 (D) 44 (H)mm (19" 7.7" 1.7")
3.3kg (7.27lb)
14 Watts
95-120V /210-240V , 60-50Hz 210-240V: T315mAL 250VAC
95-120V: 630mA 250VAC
FUSE: