IEI Integration EP-308A v1.11 - Manual (Page 81)

EP-308A POS
Page 71
4.1 System Maintenance Introduction
If the components of the EP-308A fail they must be replaced, such as the wireless LAN
module or the motherboard. Please contact the system reseller or vendor to purchase the
replacement parts. Back cover removal instructions and jumper settings for the EP-308A
are described below.
4.2 Motherboard Replacement
In the case of motherboard failure, please contact an IEI sales representative, reseller or
system vendor. The motherboard is accessible after opening the rear cover.
4.3 Cover Removal
WARNING!
Turn off the power before removing the bottom cover . Risk of
electrocution. Severe damage to the product and injury to the body
may occur if internal parts are touched while the power is still on.
The bottom cover of the EP-308A must be removed. To remove the bottom cover, remove
the screws then lift the cover off.