4 dvi-i devices installation, Dvi-i, Evices – IEI Integration HDC-4x-Series User Manual
Page 20: Nstallation, Figure 2-1: hdc-4x series installation
Analog
HDC-4x Series Video Capture Card
Page 13
HDC-401E
Figure 2-1: HDC-4x Series Installation
Step 4:
Insert a retention screw through the top of the video capture card external
bracket into the chassis to secure the card to the chassis.
Step 0:
2.4 DVI-I Devices Installation
Various DVI-I devices can be connected to the HDC-4x Series. Video input and video
output are all supported. Follow the steps below to connect the DVI-I devices to the
HDC-4x Series.
Step 1:
Insert the DVI-I connector from the cable into the DVI-I input connector on the
HDC-4x Series. Make sure the connection is secure.
Step 2:
Insert the DVI-I connector of the other end of the cable into the DVI-I connector
on the DVI-I device. Make sure the connection is secure.
Step 3:
Use another DVI-I cable to connect the DVI-I connector of the DVI-I display
device to the DVI-I output connector on the HDC-4x Series.
Step 0: