IEI Integration ICELOG 7 - Manual (Page 57)

ICELOG-07 Mobile Elite Manager
Page 48
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the ICELOG-07.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
ƒ Follow the electrostatic precautions outlined below whenever the
ICELOG-07 is opened.
ƒ Make sure the power is turned off and the power cord is disconnected
whenever the ICELOG-07 is being installed, moved or modified.
ƒ Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
ƒ Electric shocks can occur if the ICELOG-07 chassis is opened when the
ICELOG-07 is running.
ƒ If considerable amounts of dust, water, or fluids enter the ICELOG-07,
turn off the power supply immediately, unplug the power cord, and contact the
ICELOG-07 vendor.
ƒ DO NOT:
o Drop the ICELOG-07 against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature