IEI Integration AUPS-C20 v1.01 - Manual (Page 25)

AUPS-C20 UPS Module
Page 17
Step 4: Install battery 1 and battery 2 into the AUPS-C20 (Figure 3-4). Make sure the
battery packs are connected to the battery connectors on the board (Figure
3-4).
Figure 3-4: Battery Pack Installation
Step 5: Secure each battery pack with two retention screws (Figure 3-4).
Step 6: Replace the battery bracket and battery board (Figure 3-5).
Figure 3-5: Reinstalling the Battery Bracket and Battery Board