ADTRAN 619500001-19A - Manual (Page 9)

Unified Communications Server Preparing to Install the NetVanta UC Server
619500001-19A Copyright © 2009 ADTRAN, Inc. 9
3. If you disconnected any cables to open the chassis, reconnect all cables firmly.
4. Close the computer chassis.
Preparing to Install the NetVanta UC Server
The following topics are covered in this section:
• Minimum System Requirements on page 10
• Limitations and Restrictions on page 10
• Starting the NetVanta UC Server on page 11
• Verifying the Internet Connection on page 12
• Verifying the Operating System on page 12
• Configuring Antivirus Software on page 13
• Configuring Services on page 13
• Installing Microsoft MAPI Connector on page 14
• Installing CTI Link/Tapi Software on page 15
• Installing the Agent for IP Office Centralized Voicemail on page 17
To correctly install NetVanta software on the server, you need to log onto the computer as a user with local
administrative rights.
For information about installing the Intel Dialogic cards, please refer to the manufacturer’s
instructions.
For multiple D/82JCT cards a jumper cable is needed (CT Bus cable).
We recommend that you install and configure the server at the customer site.
Additional hardware and software might be required for specific private branch exchange
(PBX) integrations.