Q record usb player basic operations – American Audio Q-Record User Manual
Page 16
Q RECORD USB PLAYER BASIC OPERATIONS
Figure 1: To remove the USB device make sure that the USB device is not in play mode, then gently remove the device.
Figure 2: tapping the reverse track
button will jump back to the previ-
ous track.
Figure 3: tapping the forward track
button will skip forward to the next
track..
1. LOADING/EJECTING AN USB STICk
The Q Record can read an USB stick or USB Card Reader.
the auio files located on the usB stick or
on the sD card must be Mp3 format. You cannot have any other type files on the usB stick or
sD card.
When connecting a USB stick, USB card reader, or external hard drive make sure you are correctly
lined up with the USB port and gently insert the USB connection. To disconnect a USB device, stop playback
and remove the USB device.
please see page 7 for sD card and usB drive information.
CAUTION:
•
NEvER attempt to remove a USB device while in PLAY mode.
2. SELECTING TRACkS
Select a desired track by using the traCk bUttOns (47).
Tapping the traCk bUttOns (47) once will select
either the next higher or lower track.
Figure 1
©
American Audio
®
- www.americanaudio.us - Q Record Instruction Manual Page 16
Figure 3
Figure 2