Lincoln Electric IM10114 TANDEM CRUISER - Manual (Page 53)

C-2 ACCESSORIES C-2
TANDEM CRUISER™
Accessories Included with the TANDEM
CRUISER™ :
Conduit Tubing, 5 feet (1.5 m)
5/32” 600 Amp contact nozzle assembly
5/32” contact tip
Nozzle extension, 5 inches long (127 mm)
Nozzle extension insulator
Nozzle extension, 45° Curved
Flux tubing
Flux Hose Clamps
Wire Reel Assembly
Wheels for track operation
Front and Rear outriggers
Wire Reel Enclosure
Does not include a control cable.
K3090-1 Tube and clamp kit Includes: one 30”
aluminum splined tube;
one 15” aluminum splined
tube; one 30” steel tube; 8
clamp assemblies with
keys; 2 outrigger
assemblies; hardware.
K3089-1 Cross Slide Assembly Includes: two slides with 4
inches of travel. (1 cross
slide assembly included
with each tractor.)
K1733-5 Wire Straightener Includes: A three roll wire
straightener with
adjustable pressure. (1
included with each tractor)
K396 Track Section Includes: a single section
of 70 in (1.8m) of track.
K3070-1 Tiny Twin Kit for the
tractor Includes: 2 nd
spindle, drive
rolls, 57:1 gears.
K1543-xx ArcLink Control Cable Includes: 5 pin to 5 pin
tractor to power source
control cable. Cables may
be connected end-to-end to
make a longer cable.
Connectors are black
anodized aluminum.
K2683-xx ArcLink Control Cable,
Heavy Duty Includes: 5 pin to 5 pin
tractor to power source
control cable. Cables may
be connected end-to-end to
make a longer cable.
Female connector is a
brass spin nut. Male
connector is made from
stainless.
K1504-1 60 lb Coil Adapter Includes: one coil adapter
for use with 2” spindles.