Master Manufacturing SLC-11-015A-MM 15 Gal. Spot Sprayer - Manual (Page 3)

recommended by the chemical manufacturer can assist in removal of a persistent chemical. When the system is
thoroughly cleaned drain the tank, suction line, pump, hoses, etc.
The following steps should be followed for the maintenance and storage of your sprayer.
1.) Wash and flush out sprayer after completion of each phase of your program. Flush out sprayer when
changing chemicals if there is a possibility of the chemicals being incompatible. Use of a detergent is
advisable if the chemical manufacturer does not make specific cleaning recommendations. Flush system
completely, including nozzles. Never use metal objects to open clogged nozzles.
2.) Clean sprayer thoroughly before storing at the end of the spraying season. Permanent type anti-freeze added
to the final rinse will leave a rust inhibiting film in parts of the sprayer.
PARTS LIST
Ref. Qty. Part Number Description
1 2 PW-625019-50H AXEL CAP, 5/8’
2 2 TWA410/350-4 TIRE, WHEEL ASS.
3 1 32-100019 WELDMENT, AXEL
4 12 33-100113 NUT, FLANGE 5/16-18
5 1 31-100138 HITCH, BOTTOM
6 1 31-100121 HITCH, TOP
7 1 31-100114 TONGUE, SPRAYER
8 8 33-100116 SCREW, CAP, 5/16-18 X 1”
9 1 31-100116 SPRAYER FRAME
10 1 31-100115 FRONT TANK MOUNT, 25 GALLON ONLY
11 4 33-100112 SCREW, CARRIAGE, 5/16-18 X 1”
12 1 33-103231 TANK, 15 GALLON
1 33-103230 TANK, 25 GALLON
13 1 TL-6B LID, TANK
14 1 N34 CAP, FGHT
15 1 W406V WASHER, GARDEN
16 2 31-100119 BOOM MOUNT
17 4 33-100115 WASHER, FLAT 5/16”
18 4 33-100114 SCREW, CAP 5/16-18 X
”
19 1 SG-4507F GUN, WAND SPRAY
20 9 SHC-F SNAPPER HOSE CLAMP
21 15FT 3204-1407 HOSE, RUBBER 3/8” X 15 FT
22 1 EL1238 ELBOW,

” MPT X 3/8” HB
23 1 GTT1214 TEE,
” MPT X
” MPT X
” MPT
24 1 1120DSB100 GAUGE, 100 PSI
25 1 E3412 ADAPTOR, ” MGHT X
” MPT
26 1 GHV-1-BLK GARDEN HOSE VALVE
27 1 M1238 REDUCER,
’ MPT X 3/8” MPT
28 4 33-103127 SCREW, MACHINE 10-24 X 1”
29 4 33-103131 WASHER, #10
30 1 33-103232 PUMP, SHURFLO, 1.8GPM
1 33-103209 PUMP, DELAVAN, 2GPM
31 1 A38 FITTING, 3/8” MPT X 3/8” HB
32 18 IN 3204-1407 HOSE, RUBBER 3/8” X 18 IN
33 1 33-103121 STRAINER, INLET, 3/8” HB
34 2 8027 NOZZLE NUT
35 2 DF3.0 NOZZLE, DEFLECT TIP
36 2 NS-50 STRAINER, 50M
37 2 B12 NOZZLE NUT
38 1 31-100120 BOOM, 7’