Melnor 3025 - Manual (Page 5)

TIMER MODE
SETUP
CYCLES
(per day)
START TIME
STOP TIME
SKIP DAYS
PRE-SET (schedules)
USER SET (schedules)
TIMER
on / off
VALVE
SETUP
open / close
MODEL 3025
LCD digital
display
with next step
prompting.
ACCEPT
TO SET MINUTES
After selecting Hour with Accept ▼ key, minutes will flash.
Press ᮤ or ᮣ to select current minutes. Unit will beep one (1) time for each press.
(Holding down keys will scroll numbers for faster selection.)
Press Accept ▼ when current minutes flash.
NOTE: If in 12-hour mode, press Accept ▼ after selecting proper AM/PM setting using ᮤ or ᮣ . This step is
skipped in 24-hour mode.
ACCEPT
ACCEPT
3025 tri-Ling book.fa 2/7/00 9:19 PM Page 5