Melnor 3050 User Manual
Page 6
TO SET DATE
Press
ᮤ
or
ᮣ
to select current month. Unit will beep one (1) time for each press.
(Holding down keys will scroll numbers for faster selection.)
Press ACCEPT ▼ when current month flashes. Unit will beep one (1) time and day of month number will
flash.
Press
ᮤ
or
ᮣ
to select current day of month. Unit will beep one (1) time for each press.
Holding down keys will scroll numbers for faster selection.
Press ACCEPT ▼ when current day of month flashes. Unit will beep one (1) time and day of week flash.
Press
ᮤ
or
ᮣ
to select current day of week. Unit will beep one (1) time for each press.
Press ACCEPT ▼ when current day of week flashes. Unit will beep one (1) time and return to Auto mode,
for pre-set schedule #1.
LIGHT
Unit has two lights in face of timer if you are located in a dark area for programming.
Press light key to turn on lights.
Press light key again, to turn off lights.
NOTE: Keep lights off during normal operation to save battery life.
LIGHT
LIGHT
ACCEPT
ACCEPT
ACCEPT