MoJack EasyStep by MoJack - Manual (Page 4)

MoJack EasyStep MoJack EasyStep
6 7
Assembly Instructions for the MoJack EasyStep
STEP 6
Slide the telescoping
arms upwards until
they meet at the top.
Replace the locking
pin to secure the arms
together at the top
and then position the
2 locking pins at the
base of the telescoping
arms.
LOCKING PINS
STEP 7
Flip the EasyStep to the
opposite side.
Assembly Instructions for the MoJack EasyStep
STEP 8
Repeat steps 5 & 6 so that there are 2 support
arms for climbing.
STEP 9
Now you are ready to place the EasyStep over your
obstacle and climb safely to your destination.
LOCKING PINS
LOCKING PINS