Alpine iDA-305 - Manual (Page 45)

43
-EN
USB cable connection
Insert a USB cable into the unit, and fix with a lock screw.
iPhone/iPod Connection (sold separately)
Connect USB cable to an iPhone/iPod with iPod Dock interface
cable.
Remove the iPhone/iPod
Remove the iPhone/iPod from the iPod Dock interface cable.
• After changing the unit to a source other than the iPod, remove the
iPhone/iPod. If the iPhone/iPod is removed in the iPod mode, data
may cause damage.
• If sound is not output or the iPhone/iPod is not recognized even when
the iPhone/iPod is connected, remove the iPhone/iPod once, then
connect it again, or reset the iPhone/iPod.
• Before connecting the iPhone/iPod to this unit, set the EQ function of
iPhone/iPod to OFF.
• Do not leave the iPhone/iPod in a vehicle for a long time. Heat and
humidity may damage the iPhone/iPod and you may not be able to
play it again.
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
Remove USB memory
Pull out USB memory squarely from the USB cable.
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
Portable Audio Player Connection (sold separately)
Connect Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
Remove Portable audio player
Disconnect the Portable audio player from the supplied
player cable.
• Refer also to the Owner’s Manual of the Portable audio player.
USB Cable
iPod Dock interface Cable
USB cable
USB memory
USB cable
USB memory
USB cable
USB cable
Supplied cable for the Portable audio player