Otter Outdoors Pro Ice Cabin User Manual
Page 3
Page 3
6. Assemble Back and Center Main Frame Bars: Insert the outer main frame bar (Item 13) into the middle main
frame bar (Item 14). Fasten with self-tapping screw (Item 22). Slide the sleeve (Item 21) over the main frame
extension bar (Item 11). (Line up holes with button lock, press lock in as you slide over the bar). Insert the
black plug (Item 23) into the main frame extension bar (Item 11). Insert outer main frame bar (Item 13) into sleeve
(Item 21). Cover end of main frame extension bar (Item 11) with black end cap (Item 24). Ref. Diagram 3.
Diagram 3
23
13
7. Attach Back and Center main frame assemblies (Assembled in Step 6) onto frame brackets (Item 3 and 4).
Secure with 1/4 nylon hex lock nut (Item 28). Ref. Diagram 4.
4
3
3
Back Main Frame Assembly
Center Main Frame Assembly
28
Diagram 4
21
24
Button
lock
11
13
11
Note:
Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
14
22
22
22
22
Note:
Predrilling a
3/32” hole will make
installation of
screws easier.