Otter Outdoors Wild Ice Cabin - Manual (Page 5)

Page 5
10. Attach Bottom main frame assembly (Assembled in Step 9) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 20). Ref. Diagram 8.
4
3
3
Diagram 8
20
Bottom Main Frame Assembly
17
15
Button
lock
9. Assemble Bottom Main Frame Bar: Insert the outer main frame bar (Item 13) into the middle main frame bar
(Item 14). Fasten with self-tapping screw and plastic protector (Item 16). Slide the sleeve (Item 15) over the main
frame extension bar (Item 9). (Line up holes with button lock, press lock in as you slide over the bar).
Insert the black plug (Item 17) into the main frame extension bar (Item 9). Insert outer main frame bar (Item 13)
into sleeve (Item 15). Cover end of main frame extension bar (Item 9) with black end cap (Item 18). Ref.
Diagram 7.
Diagram 7
18
9
13
16
14
9
13
16
16
16
Note:
Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
Note:
Predrilling a
3/32” hole will make
installation of
screws easier.