Otter Outdoors Bench Option - Manual

Otter II Bench Option
Installation and Set-Up Instructions
Installation:
1. Layout all parts.
2. Attach both support bars (Item 3) to the bottom
of the bench (Item 2) with the support brackets
(Item 4). Attach the support brackets using the
#10 x 3/4 bolts (Item 7) into the predrilled holes
in the bench. Ref. Diagram 1.
Parts Identification and Check List:
Sled
(Sold Seperately)
Bench
(Qty 1)
Support Bar
(Qty 2)
Support Bar
Bracket (Qty 2)
Locking Pin
(Qty 2)
Sled Bracket
(Qty 2)
1
2
3
4
5
6
3
2
4
7
Diagram 1
8
9
10
5/16 Washer
(Qty 4)
5/16 NyLock Nut
(Qty 4)
5/16 x 3/4 Hex
Bolt (Qty 4)
7
#10 x 3/4
Bolt (Qty 8)
Tools Required:
1/2 Box End Wrench
1/2 Socket and Ratchet
Drill
3/8 Bit
Phillips Screwdriver