Otter Outdoors Sled Tow Hitch (XL) - Manual (Page 2)

2 in.
3
5 7
8
7
Tools Required: Towing Hitch Instructions for the Following Sled:
1/2 Box End Wrenc
1/2 Socket and Rachet
Otter II X-Large Sled
Drill
3/8 bit
Straight Edge & Marker
Adjustable Crescent Wrench
Installation for Sleds:
1. Layout all parts.
2. Turn the sled upside down.
3. With a straight edge, mark a line towards the front of sled 2 inches above the sled lip on both sides.
4. Line up the U-Shaped sled bracket (Item 3) on the line marked as shown below. Bracket should be tight against the
front of the sled.
5. Mark all 6 holes and remove the bracket, then drill with the 3/8 bit.
6. Attach the U-Shaped sled bracket (Item 3) with the fasteners shown.
t