Paasche Airbrush VL/VLS-PL - Manual (Page 4)

Paasche® VL & VLS Cups, Bottles and Accessories Page 4
NO. PART NO. DESCRIPTION
37.* VL-3-OZ 3 oz. Glass Bottle Assembly (89cc)
VL3 3 oz. Metal Cover & Tube Assembly
H-108 3 oz. Glass Bottle (89cc)
38.* PCVL-3-OZ 3 oz. Plastic Cover & Metal Tube Assem. (89cc)
PCVL3 3 oz. Plastic Cover & Metal Tube Assembly
H-108 3 oz. Glass Bottle (89cc)
39.* VLP-3-OZ 3 oz. Plastic Cover, Tube & Bottle Assem. (89cc)
VLP3 3 oz. Plastic Cover & Tube Assembly
62-17P 3 oz. Plastic Bottle (89cc)
40.* VL-1/2-OZ 1/2 oz. Glass Bottle Assembly (14.5cc)
VL1/2 1/2 oz. Metal Cover Assembly W/Gasket
H-164 1/2 oz. Glass Bottle (14.5cc)
41.* VL-1-OZ Color Bottle Assembly (29cc)
VL1 1 oz. Cover Assembly
H-99 1 oz. Glass Bottle (29cc)
42.* VLD-3-OZ 3 oz. Decorator Bottle Assembly (89cc)
H-108 3 oz. Glass Bottle (89cc)
43.* VL-2-OZ Aluminum Cup Assembly (60cc)
VF-23 2 oz. Aluminum Cup (60cc)
44.‡ VLS-3-OZ 3 oz. Bottle Assembly (89cc)
VLS3 3 oz. Metal Cover Assembly
H-108 3 oz. Glass Bottle (89cc)
45.‡ VLPS-3-OZ 3 oz. Plastic Bottle Assembly (89cc)
VLPS3 3 oz. Plastic Cover & Tube Assembly
62-17P 3 oz. Plastic Bottle (89cc)
46.‡ PCVLS-3-OZ 3 oz. Plastic Cover & Metal Tube Assem. (89cc)
PCVLS3 3 oz. Plastic Cover & Metal Tube Assembly
H-108 3 oz. Glass Bottle (89cc)
47.‡ VLS-2-OZ Aluminum Cup Assembly (60cc)
VF-23 2 oz. Aluminum Cup (60cc)
48.‡ VLS-1-OZ Color Bottle Assembly (29cc)
VLS1 1 oz. Cover Assembly
H-99 1 oz. Glass Bottle (29cc)
49.‡* VL-1/4-OZ Metal Color Cup (7cc)
NOTE: 3-JG Gasket for 3oz and 2oz bottles
5-G Gasket for 1 oz bottles
D500 AIR COMPRESSOR (1/8 H.P.) (ETL Listed)
Economical and suitable for all airbrushes spraying properly
thinned fluids. It is capable of delivering up to 35 P.S.I.
operating pressure depending on airbrush being used. The
Paasche D500 is an oilless piston compressor. It operates on
110-120 Volt, 1 phase, 60Hz, and delivers .4 C.F.M. @ 20
P.S.I. Shipping Weight: 8 lbs. (3.6kg)
VL and VLS BOTTLE ASSEMBLIES and CUP
*
Cup or Bottle for VL Airbrush , ‡
Cup or Bottle for VLS Airbrush
Recommended Compressors and Accessories
AIRHOSES W/FACTORY INSTALLED COUPLINGS
53. HP-1/8 PVC-Red Plastic Airhose W/Couplings
54. A-1/8 Braided Airhose W/Couplings
59. VL-127 Strainer for PTFE White Color Tube Only
ACCESSORIES (not shown)
A-34 Hanger
V-62 Wrench
D220R AIR COMPRESSOR (1/6 H.P.), with Switch
& R-75 Regulator
Economical and suitable for all airbrushes spraying
properly thinned fluids. It is capable of delivering 30 -
45 P.S.I. operating pressure depending on airbrush
being used. The Paasche D220R is an oilless
diaphragm unit and comes with the R-75
Regulator/Filter with gauge. It operates on 110-120
Volt, 1 phase, 60Hz, and delivers .7 C.F.M. @ 20
P.S.I. R75 Regulator will regulate up to 45 P.S.I.
depending on usage (intermittent or constant) and
size of airbrush being used.
Shipping Weight: 11 lbs. (5kg)
DA300R AIR COMPRESSOR (1/8 H.P.)
with Switch CSA approved & R-75 Regulator
1/8 H.P. Piston Compressor with Auto shutoff.
Compressor shuts off when airbrush is not in use.
Operating pressure is 20 - 30 P.S.I. depending on
airbrush being used, delivers up to 35 psi. 120 VAC, 1
Ph, 60 Hz, 1.4 A, 20L/Min. (0.7CFM), Noise 53dB,
1720 rpm. Shipping Weight: 9.14 lbs. (4.6 kgs)
DA400R AIR COMPRESSOR (1/6 H.P.)
1/6 H.P. Piston Compressor with Auto shutoff.
Compressor shuts off when airbrush is not in
use. Operating pressure 30 - 50 PSI depending
on airbrush being used, delivers up to 55 psi..
110-120VAC, 1 Ph, 60 Hz, 42L/Min. (1.48CFM),
1720 rpm. With R-75 Regulator & Moisture Trap
included.
Shipping Weight: 12.2 lbs. (5.6 kgs)