Paasche Airbrush F830-4 - Manual

INSTRUCTIONS AND PARTS SHEET AH-7/12/2012
Supersedes Instructions & Part List AH-8/31/2011
WARNING: This product must be grounded to
prevent electrical shock. Proper use of the three
wire grounding cord installed with each unit is
essential for its safe use. The plug must be plugged
into an outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
This unit is designed for the spraying of water only.
D i s c o n n e c t p o w e r b e f o r e s e r v i c i n g .
F810-2 & F830-4
Automatic Humidifier Units
( 2 or 4 Spray Heads)
OPERATING INSTRUCTIONS & REPLACEMENT PARTS
Printed in the U.S.A.
Paasche Airbrush Company
4311 North Normandy Avenue
Chicago, IL 60634-1395
Phone: 773-867-9191 • Fax: 773-867-9198
Website: paascheairbrush.com
E-Mail: [email protected]
INTRODUCTION:
For dependable moisture and humidity control, these units
provide an efficient method of maintaining uniform moisture
in paper, fabric, tobacco, etc. at the same time helping to
reduce the possibility of fire hazards. The water is finely
atomized and quickly absorbed into the room atmosphere.
Each Automatic Spray Atomizer requires 1/2 C.F.M. at 50
p.s.i. air pressure for the finest uniform atomization.
FIRE PREVENTION:
Paasche Humidifier Units present an inexpensive means of
reducing the danger of spontaneous combustion. Proper
humidification limits dust diffusion and grounds static electricity.
HUMIDIFIER USES:
• Printing and Bindery Plants- They are of great value
for keeping paper quality at its best to assure perfect
registration when printing.
• Tobacco and Similar Industries- require uniform
humidity control when aging and curing.
• Textile Mills, Clothing Factories, Warehouses-
Fabrics tend to gradually deteriorate in dry atmosphere.
When adequate humidity is maintained, goods retain their
original luster and sheen. Dangers from lint and dust
accumulations are greatly minimized with proper humidity.
• Carton Manufacturers- Winter conditions can dry out
materials used to make boxes, causing tears and
improper folding during manufacture or damage by the
customer while in use.
• Dry and Dusty Factories- Factories which are dry and
dusty due to insufficient humidity, are constantly subject
to the dangers of spontaneous combustion. One method
of reducing this hazard is with a uniform, accurate and
dependable Automatic Humidifier Unit by Paasche.
F830-4 Automatic Humidifier (4 Spray Heads) Capacity -
60,000 Cubic Feet, maximum 60 Gallons in 24 hours
HUMIDIFIER UNITS:
• F810-2 Automatic Humidifier (Two Spray
Heads) Capacity - 30,000 Cubic Feet, maximum
output 30 Gallons (227 l) in 24 hours.
• F830-4 Automatic Humidifier (Four Spray
Heads) Capacity - 60,000 Cubic Feet, maximum
output 60 Gallons (454 l) in 24 hours.