Paasche Airbrush GT-PL - Manual (Page 7)

7
Replacement Parts List
INSTRUCTIONS & PARTS LIST GT-25
Please provide following information:
-Model number
-Serial number (if any)
-Part descriptions and number as shown in parts list Address parts correspondence to:
Paasche Airbrush Company
4311 North Normandy Ave.
Chicago, Illinois 60634-1395
This unit must be assembled as indicated
in these instructions. only those parts supplied
with this unit should be used. These parts are safety and performance
engineered for this paint tank. use only oEM replacement
components.
Make sure nuts and bolts are properly
tightened before pressurizing the tank.
www.paascheairbrush.com
1 MATERIAL TANK 1
2 LID ASSEMBLy 1
3 HANDLE 1
4 GASKET 1
5 FLUID TUBE 1
6 SWING BOLT 4
7 WASHER 4
8 CLAMPING KNOB 4
9 PRESSURE REGULATOR 1
10 PRESSURE GAUGE 1
11 ADAPTER ( AIR INLET) 2
12 ADAPTER 1
13 MATERIAL OUTLET 1
14 ADAPTER ( FLUID OUTLET) 1
15 RELEASE vALvE 1
18 SAFETy vALvE ASSEMBLy 1
24 NUT 1
25 COTTER PIN 4
26 “C” SNAP RING 8
22 AIRMOTOR AGITATOR (NOT SHOWN) OPTIONAL #1S-13 1
NOTE: WITH AIRMOTOR AGITATOR OMIT ITEM NO.1 TANK LID HANDLE
Reference
Number Description Part Number Quantity