Air Comm Systems ACS 296 - Manual (Page 4)

Air Comm Systems, Inc. Page 4
The ACS 296 is designed to be Dzus mounted in close proximity to the Audio Mixer Panel it will
interface with. The unit should be installed in the aircraft using the DC09-USFS-F Installation kit that was
included. The above outline drawing of the unit with dimensions will facilitate the installation.
The DC09-USFS-F Installation Kit consists of the following:
One (1) 9 pin AMP D-Subminiature mating connector (female) complete with crimp pins, hood, and latch.
The connector pin configuration of the ACS 296 rear connector and the recommended wire size for the
aircraft cable harness is shown on the following page.
n
Physical Dimension Outline
ACS 296 Installation Manual
Physical Dimensions