Avenview HDMI-C5XD-S - Manual (Page 9)

www.avenview.com 9
1.8 Installation (HDMI-C5XD-S)
To setup Avenview HDMI-C5XD-S follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect a Local HDMI display to the HDMI out of the HDMI-C5XD-S and then connect a speaker to
the 3.5mm audio socket.
3. Connect to a HDMI source (such as a Blu-Ray Disc player)
4. Connect HDMI-C5XD-S to HDMI-C5XD-SR or HDMI-C5-3-R from RJ45 Out with CAT5 / CAT5 cable
5. Plug in 5V 4A DC Power (supplied).
6. Power on the HDMI display
7. Power on HDMI Sources.
1.9 Installation (HDMI-C5XD-SR)
To setup Avenview HDMI-C5XD-SR follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect a Local HDMI display to the HDMI out of the HDMI-C5XD-SR and then connect a speaker to
the 3.5mm audio socket.
3. Connect to RJ45 cable to HDMI Signal IN which is connected to RJ45 OUT on HDMI-C5XD-S
4. Connect HDMI-C5XD-SR to another HDMI-C5XD-SR for cascading or HDMI-C5-3-R from RJ45 Out with
CAT5 / CAT5 cable
5. Plug in 5V 4A DC Power (supplied).
6. Power on the HDMI display
7. Power on HDMI Sources.