Poly-Tex Venus 1350 - Door Cover - Manual (Page 2)

Assembly Instructions
Door Cover
Safety Advice
•
Sort the parts and check against the list of contents.
•
For safety purposes we strongly recommend that the product will be assemble
by two people.
•
We strongly recommend the use of work gloves during assembly.
•
Do not attempt to assemble the Door Cover in windy or wet conditions.
•
Always wear shoes and safety goggles.
•
Dispose of all plastic bags safely - keep them out of reach of small children.
•
Keep children away from the assembly area.
•
Do not attempt to assemble the Door Cover if you are tired, have taken drugs,
medication or alcohol, or if you are prone to dizzy spells.
•
When using a stepladder or power tools, ensure that you follow the manufacturers
safety advice.
•
Ensure that there are no hidden pipes or cables in the wall before drilling.
•
Please consult your local authorities if any permits are required to instal Door Cover
•
Tighten all screws when completing assembly.
Cleaning instructions
•
When your Door Cover needs cleaning, use a mild detergent solution and rinse
with cold clean water.
•
Do not use acetone, abrasive cleaners or other special detergent to clean the panel.
During Assembly:
Step 7: insertion of the elastic bands (7051#) should be done simultaneously from up
and down.
Step 8: Attention – please make sure that the installation height of the canopy does
not interrupts door opening.
Draw a vertical flush line and 2 horizontal upright lines.
•
The wall plug delivery with the product are only define for a concrete wall. In case
of different wall, please adapt your wall fixation (Seek advice to a vendor)
English
For additional information please visit our website: www.palramapplications.com
Attention!
Please read these instructions carefully before you start to assemble this product.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
Tools & Equipment:
Warning:
•
You are solely responsible for determining whether the handling, storage,
assembly, installation or use of this product is safe and appropriate in any
location or for any given application. Palram is not responsible for any damages
or injury to you, any other person or any property resulting from the improper
handling, storage, installation, assembly or use of this product, or the failure to
follow Palram’s written instructions regarding the handling, storage, installation,
assembly and use of this product. This product is intended for normal residential
use only. Do not use this product for any application that is not recommended in
these instructions or building codes in effect in location where this product will
be used. Always take care and use appropriate safety equipment (including eye
protection) when assembling or installing this product.
ø 10 mm
ø 5/16”
10 mm
13 mm
x2
ø 10 mm
ø 5/16”
10 mm
13 mm
x2