Poly-Tex Palermo - Gazebo 3600 User Manual

Page 2

Advertising
background image

» During Assembly

During assembly use a soft surface below the parts

to avoid scratches and damages.

» You will need

(Supplied)

(These items are

not supplied)

Step 7:

It is recommended to use a carton or other soft material under the lowered

corner in order to avoid scratches and peeling of paint.

*This note also refers to steps 8,9,10
Steps 10a+12a:

Please note that threading of the screws should be done from the outside

Steps 11b+13a:

Please note that threading of the screws should be made from the bottom up.

Afterwards please use a screwdriver for easy screwing

Step 14b:

Please add silicone on the inner area of part # 7661 as illustrated

Step 20a:

Please drill holes in the panels to be located precisely parallel to the holes in

profiles # 7744 + # 7743

Step 21:

Please level the profiles’ legs and adapt screws and plugs to your specific ground

type.

Please note: Screws and plugs are not supplied*

Please Fasten all screws at the end of assembly

IMPORTANT

Please read these instructions carefully before you start to assemble this product.

Please carry out the steps in the order set out in these instructions.

Keep these instructions in a safe place for future reference.

» Care and Safety advice

Please follow the instructions as listed in this manual.

Sort the parts and check against the list of contents.

For safety purposes we strongly recommend that the product will be assembled

by at least two people.

Some parts have metal edges. Please be careful when handling components.

Always wear gloves, shoes and safety goggles during assembly.

Do not attempt to assemble the Gazebo in windy or wet conditions.

Dispose of all plastic bags safely – keep them away from children’s reach.

Keep children away from the assembly area.

Do not attempt to assemble the Gazebo if you are tired, have taken drugs,

medications or alcohol, or if you are prone to dizzy spells.

When using a stepladder or power tools, ensure that you are following the

manufacturer’s safety advice.

Do not climb or stand on the roof.

Heavy articles should not be leaned against the poles.

Keep roof and gutters clean of snow, dirt & leaves.

Heavy load of snow on roof can damage the Gazebo making it unsafe to

stand below or nearby.

This product was designed and produced for it’s aimed purpose only.

If color was scratched during assembly it can be fixed with the following tints:

Grey – RAL 7012

» Cleaning instructions

In order to clean the Gazebo, use a mild detergent solution and rinse with

cold clean water.

Do not use acetone, abrasive cleaners, or other special detergents to clean the panels.

EN

13mm

5mm

3/16”

10mm

25/64”

SILICON \

CAULK

When encountering the information icon, please refer to the relevant

assembly step for additional comments and assistance.

Advertising