Probuilt Professional Lighting SmithLight IN120LB - Manual (Page 2)

Operating the Light Head
1. Press the black circular rocker switch on the underside of the light head to turn the
SmithLight ON and the front of the light head will illuminate. The light head can now be
cycled through six different settings by pressing the red button next to the ON/OFF
switch as follows:
Press Red
Button Light Head
Illuminates Light
Mode
None (Default “on”) Front Steady
Once Back Steady
Twice Front & Back Steady
Three times Front Flash
Four times Back Flash
Five times Front & Back Flash
Six times Front (back to default) Steady
Note: the SmithLight will “beep” as it moves through each setting
2. The light head will continue to operate on the chosen setting even if it is completely
lowered into the housing. When combined with the Flash setting this feature provides
for a unique hazard warning system.
3. Press the black circular rocker switch to turn the SmithLight OFF.
4. NOTE: If the unit is being charged it will only allow one side of the light head to be
illuminated. This feature insures that the unit will still properly charge while in use,
although charge time will be extended.
SmithLight IN120LB Key Features
· No assembly, no loose parts and no set-up required
· Up to 30 hours of continuous run time on a full charge (one side illuminated)
· IP65 weather proof and dust proof
· cUL listed (ETL File No. 4002373)
· VRLA gelled acid battery – leak proof and spill proof, even if punctured
· Battery status indicators and warnings for recharge and operation
Precautions
· Do not allow the battery to sit in a completely discharged state for a period longer
than seven days as this may cause damage to the battery.
· Use only the charging cables and adapter provided.
· See the User Manual provided for complete instructions, features and precautions.
QUESTIONS or PROBLEMS?
Contact ProBuilt Professional Lighting
877-707-0800
[email protected]