Qualcraft Permanent Adjustable Standing Seam Roof Anchor - Manual (Page 8)

Product Specific Applications
! WARNING
Use of equipment in unintended applications may result in serious
injury or death. Maximum 1 attachment per connection point.
For all applications: worker weight capacity range
(including all clothing, tools, and equipment) is 130-310 lbs.,
or up to 420 lbs. if used in combination with
equipment explicitly certified for such use.
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
6
Restraint: Permanent Adjustable Standing Seam Roof Anchors may be used in
Restraint applications. Restraint systems prevent workers from reaching the leading
edge of a fall hazard. Always account for fully deployed length of lanyard/SRL.
Structure must withstand loads applied in the directions permitted by the system of
at least 1,000 lbs. No free fall is permitted. Restraint systems may only be used on
surfaces with slopes up to 4/12 (vertical/horizontal). Applicable D-rings: Dorsal,
Chest, Side, Shoulder.
Work Positioning: Permanent Adjustable Standing Seam Roof Anchors may be
used in Work Positioning applications. Work Positioning systems allow a worker to
be supported while in suspension and work freely with both hands. Structure must
withstand loads applied in the directions permitted by the system of at least
3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side, Shoulder.
Personal Fall Arrest: Permanent Adjustable Standing Seam Roof Anchors may be
used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall
Arrest applications. Structure must withstand loads applied in the directions
permitted by the system of at least 5,000 lbs. Maximum free fall is 6‘, or up to 12’
if used in combination with equipment explicitly certified for such use. Applicable
D-ring: Dorsal.