Ramsey Winch ROLLER GUIDE 256053 - Manual

INSTALLATION INSTRUCTIONS FOR
ROLLER GUIDE KIT #256053
This kit is for use on winch models RPH 8000, IPH 8000, IPH 10,000 and 200/300 series with "Y"
length drums.
Drill two 7/16 diameter holes through the horizontal flange of the rear most mounting angle, as shown
in FIGURE 1. Position the roller guide over the two holes. Securely attach the roller guide using the
two 3/8 diameter capscrews with lockwashers.
PARTS LIST FOR 256053
PART
NO. QTY. DESCRIPTION
274025 1 ROLLER GUIDE ASSEMBLY
414320 2 CAPSCREW 3/8-16NC X 1-1/4 LG. HX.HD. GR. 5, FORD BLACK
418175 2 LOCKWASHER 3/8 MED. SECT. PLTD.
KI-912524-0994