Avaya P882 User Manual
Abstract
GAK; Reviewed:
WCH 7/7/2003
Solution & Interoperability Test Lab Application Notes
©2003 Avaya Inc. All Rights Reserved.
1 of 31
intel-lag-notes.doc
A Sample 802.1Q Hunt Group Trunk Configuration
Between an Avaya™ P882 Gigabit Ethernet Switch and
Servers with Intel Dual Port Server Adapters - Issue 1.0
Abstract
These Application Notes describe a sample Link Aggregation Group (LAG) configuration
between two Windows 2000 Servers: one equipped with an Intel PRO/100+ Dual Port Server
Adapter and the other an Intel PRO/1000MT Dual Port Server Adapter. Each adapter is
connected to an Avaya™ P882 Gigabit Ethernet switch via a separate 802.1Q Hunt Group
Trunk. A sample configuration diagram has been included along with all of the necessary
provisioning steps. These Application Notes were created as a result of field requests for
information on interoperability with Intel Dual Port Server Adapters.
Document Outline
- Introduction
- Equipment and Software Validated
- Avaya™ P882 Switch Web Agent Administration
- Create the Virtual LAN
- Configure Module 2 (M8024R-100TX) Switch Port Parameters
- Configure Module 3 (M8024R-100TX) Switch Port Parameters
- Configure Module 4 (M8008R-1000T) Switch Port Parameters
- Create and Assign an IP Interface to the VLAN
- Create the Hunt Groups
- Disable Module 3 Ports Being Added to the Hunt Group
- Disable Module 4 Ports Being Added to the Hunt Group
- Add Module 3 Ports to the Hunt Group
- Add Module 3 Ports to the Hunt Group
- Enable the Module 3 Hunt Group Member Ports
- Enable the Module 4 Hunt Group Member Ports
- Intel PRO/1000MT Dual Port Server Adapter Configuration
- Verification Steps
- Conclusion
- Additional References