Ramsey Winch HDG-350 LEVER EQUIPPED - Manual (Page 3)

1
RAMSEY WINCH MODEL HDG-350
PLEASE READ THIS MANUAL CAREFULLY
.
This manual contains useful ideas in obtaining the most efficient operation from your
Ramsey Winch, and safety procedures one needs to know before operating a Ramsey Winch.
Ramsey Winches are designed and built to exacting specifications. Great care and
skill go into every winch we make. If the need should arise, warranty procedure is outlined
on the back of your self-addressed postage paid warranty card. Please read and fill
out the enclosed warranty card and send it to Ramsey Winch Company. If you have any
problems with your winch, please follow instructions for prompt service on all warranty
claims. Refer to back page for limited warranty.
SPECIFICATIONS :
CONFORMS TO SAE J706
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer
for wire rope ratings.
WARRANTY INFORMATION
Rated Line Pull (lbs.) …………………………………… 10,000
(Kg) …………………………………… 4,536
Gear Reduction …………………………………………… 30:1
Weight - HDG-350 (without cable )……………… 64 lbs. (29 Kg)
HDGY-350 (without cable) …………. 56 LBS (25.4 Kg)
Duty Cycle (ft.) …………………………………… 183
1 2 3 4**
* Rated line pull
lbs. 10,000 8,100 6,900 4,800
per layer
Kg 4,536 3,670 3,120 2,180
ft. 20 50 85 125
m 6 15 25 37
"Y" Drum
Cable Capacity
ft, 10 25 45 70
per layer m 3 7 13 21
* Line Speed
FPM 32 38 44 54
(at 15 GPM)
MPM 9,7 11,5 13,3 16,4
** Does not conform to SAE J706 specifications.
* These specifications are based on recommended wire rope of .44
inch dia. extra improved plow steel or equivalent
LAYER OF CABLE
* Cable Capacity