Ramsey Winch CHEVY WRAPAROUND KIT 295932 - Manual (Page 6)

5
Align the (2) 1/4-20NC x 1-1/4 capscrews #16 holding the headlight grille to the wraparound with the
appropriate holes in the side plate and slide into place (Figure 19). Secure using (2) 1/4" nuts #20.
Install (1) 1/4-20NC x 1" capscrew #16
through upper hole in wraparound and
into side plate. Secure using (1) 1/4” nut
#23 (Figure 20). Do not tighten.
Step 10
Re-insert (2) 3/8-16NC x 1-1/4 capscrews #18 through light
tube, shim, side plate, and channel and (1) 3/8-16NC x 1-
1/4 capscrews #18 through light tube, shim, side plate, and
upper support bracket and secure all with nut #21 (Figure
21).
Tighten all hardware to proper torque. (See torque value
chart, page 8).
Step 11
Install fairlead as shown below. Note that top holes in channel (Figure 22) align with bottom holes on
roller fairlead (Figure 23). Secure using capscrew, lockwasher, and nut furnished with winch.
Figure 21
Figure 22
FURNISHED WITH WINCH
Figure 23
FURNISHED WITH WINCH FURNISHED WITH WINCH
Figure 19
Figure 20