Ramsey Winch H-800 DOW-LOK (JERR-DAN) - Manual (Page 3)

3
Safety Precautions To Guard Against Possible Injury:
A. Clutch must be totally engaged before starting the winch operation.
B. Do not disengage clutch under load.
C. Stay out from under and away from raised loads.
D. Stand clear of cable while pulling. Do not try to guide cable.
E. Do not exceed maximum line pull ratings shown in specifications.
F. Do not use winch to lift, support, or otherwise transport people.
G. A minimum of 5 wraps of cable around the drum barrel is necessary to hold load. Cable
set screw is not designed to hold load.
Contents
Performance Specifications . . . . . .COVER
Safety Precautions . . . . . . . . . . . . . . . . .3
Techniques of Operation . . . . . . . . . . . . .4
Winch Maintenance . . . . . . . . . . . . . . . .4
Winch Mounting . . . . . . . . . . . . . . . . . . .5
Cable Installation . . . . . . . . . . . . . . . . . .5
Adjusting the Oil Cooled Worm Brake . . .5
Servicing the Oil Cooled Safety Brake . . .6
Re-assembling and Checking the Brake . .6
Test of Proper Brake Assembly . . . . . . . .6
Adjustment of Clutch Air Shifter . . . . . . .7
Troubleshooting Guide . . . . . . . . . . . . . .8
Hydraulic System Requirements . . . . . . .9
Typical Hydraulic Layout . . . . . . . . . . . . .9
Instructions for Overhaul . . . . . . . . .10-14
Dimensional Drawing . . . . . . . . . . . . . .15
Parts List and Parts Drawing . . . . . .16-17
Warranty . . . . . . . . . . . . . .BACK COVER