Reelcraft Series 30000 Electric Motor Driven Reels (EAxxxxxMxxD, EAxxxxxLxxD) - Manual

Personal injury and/or equipment
damage may result if proper safety
precautions are not observed.
• Ensure that the reel has been properly
installed before connecting supply line
(see installation instructions).
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line
ensure that supply line pressure does
not exceed maximum rated working
pressure of reel.
• Do not play pranks on other personnel.
Even low pressure is very dangerous
and can cause irrepairable damage or
death.
• Do not wear loose fitting clothing while
operating reel.
• Be aware of other personnel in work
area.
• Be aware of other machinery in work
area.
• If a leak occurs in the hose or reel,
remove supply line pressure
immediately.
• If the reel is power driven check for
loose, frayed, and/or broken wires before
operating.
• Treat and respect a hose reel as any
other piece of machinery, observing all
common safety practices.
Operating Instructions
Series 30000 Electric Motor Driven Reels
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 837-696B Rev: 5/2013
EA30106 L10A EA32118 L12D EA33112 L10A EA33122 L12D
EA30112 L12D EA32118 M12D EA33112 L12D EA33128 L12D
EA32106 L10A EA32118 M24D EA33112 M10AX EA33128 M12D
EA32106 L12D EA32122 L12D EA33112 M12D
EA32106 M10A EA32122 M12D EA33112 M24D
EA32106 M12D EA32128 L12D
EA33118 L10A
EA32112 L10A EA32128 M12D EA33118 L12D
EA32112 L12D EA33106 L12D EA33118 M10AX
EA32112 M12D EA33106 M12D EA33118 M12D
Dimensional Data
Part # B C D
EA30106 L10A 6” 19 5/8” 9 3/4”
EA30112 L12D 12” 25 5/8” 15 3/4”
EA32106 L10A 6” 19 5/8” 9 3/4”
EA32106 L12D 6” 19 5/8” 9 3/4”
EA32106 M10A 6” 19 5/8” 9 3/4”
EA32106 M12D 6” 19 5/8” 9 3/4”
EA32112 L10A
12” 25 5/8” 15 3/4”
EA32112 L12D 12” 25 5/8” 15 3/4”
EA32112 M12D 12” 25 5/8” 15 3/4”
EA32118 L12D
18” 29 5/8” 21 3/4”
EA32118 M12D 18” 29 5/8” 21 3/4”
EA32118 M24D 18” 29 5/8” 21 3/4”
EA32122 L12D
22” 33 5/8” 25 3/4”
EA32122 M12D 22” 33 5/8” 25 3/4”
EA32128 L12D
27” 38 5/8” 30 3/4”
Part # B C D
EA32128 M12D 27” 38 5/8” 30 3/4”
EA33106 L12D 6” 19 5/8” 9 3/4”
EA33106 M12D 6” 19 5/8” 9 3/4”
EA33112 L10A 12” 25 5/8” 15 3/4”
EA33112 L12D 12” 25 5/8” 15 3/4”
EA33112 M10AX 12” 25 5/8” 15 3/4”
EA33112 M12D
12” 25 5/8” 15 3/4”
EA33112 M24D 12” 25 5/8” 15 3/4”
EA33118 L10A 18” 29 5/8” 21 3/4”
EA33118 L12D 18” 29 5/8” 21 3/4”
EA33118 M10AX 18” 29 5/8” 21 3/4”
EA33118 M12D
18” 29 5/8” 21 3/4”
EA33122 L12D 22” 33 5/8” 25 3/4”
EA33128 L12D 27” 38 5/8” 30 3/4”
EA33128 M12D 27” 38 5/8” 30 3/4”
Safety Precautions