American Standard Swan 6012 - Manual

PRESSURE BALANCE
TUB and SHOWER SET
6012 Shown.
MODEL NUMBER:
6012 Pressure Balance Tub and Shower Set
E.Z. clean showerhead. I.P.S. diverter tub spout.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool "thumping". Avoids failure
due to mineral deposits - ideal for use with hard water.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
Choice of Finishes: Lifetime finishes won't tarnish or
scratch.
Lifetime Warranty on Function and Finish.
GENERAL DESCRIPTION:
C ast brass valve body. Washerless 47mm ceramic disc
valve cartridge cycles from "Off" to "Cold" to "Hot". Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. 1/2" female I.P.S.
inlets/outlets. E.Z. clean showerhead has
2.5gpm/9.5L/min. flow restrictor. Metal lever handle.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor. I.P.S. diverter tub spout.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction. E.Z. clean showerhead and I.P.S. diverter tub spout. Fitting shall be
equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits.
Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard
Model # 6012_.
FINISHED WALL
4"
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
18" OPTIONAL
5" REF.
1/2" NPT
1-5/8"
to
3-1/4"
1/2" NPT
7-1/8"
3-3/4"
MIN.
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 80''
TOP OF TUB RIM
4" REF.
5-1/2" REF.
Swan
INLETS 1/2" NPT
OUTLETS
1/2" NPT
3-3/8"
3-3/8"
THREADED INLETS