Reelcraft Series L7000 Spring Driven Cord Reels - Manual

Read this manual carefully before installing,
operating or servicing this equipment.
IMPORTANT
Operating Instructions
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
[email protected] • www.reelcraft.com
Form# 556-1190 Rev: 5/2013
Dimensions
A 20 7/8”
B 19”
C 7 7/8”
D 3 7/8”
E 14 5/8”
SAFETY
P ersonal injury and/or equipment damage may result if proper
safety precautions are not observed.
• Ensure that only a qualified electrician installs/services this
equipment.
• Ensure that power supply voltage does not exceed maximum
voltage rating of reel.
• Ensure that reel is properly installed before connecting to power
supply.
• Ensure that all electrical power is removed from reel before
servicing.
• A high-tension spring assembly is contained within the reel.
Exercise extreme caution.
• Check for frayed/broken wires before each use.
• Pull electrical cord from reel by grasping the electrical cord
itself, not the work device.
• If an electrical malfunction should occur, remove power from reel
immediately.
• Ensure that reel, electrical cable, and equipment being serviced
are properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove power immediately.
Do not pull or jerk on electrical cable!
• Treat and respect the reel as any other piece of machinery,
observing all common safety practices.
Warning: Even low voltage can cause irreparable damage or
death! Exercise extreme caution while operating or servicing this
equipment.
Four 1/2” diameter mounting holes
Series L 7000 Spring Driven Cord Reels
Model Numbers:
L 7000 L 7050 104 X