Reelcraft Series L5000 Cord Reels User Manual
Operating instructions, Series l 5000 cord reels, Important
Operating Instructions
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Series L 5000 Cord Reels
Model Numbers:
L 5000 L 5035 103 4
L 5550 123 3B L 5550 123 X
L 5400 L 5245 A 163 6X L 5550 123 7
L 5550 124 X
L 5500 L 5550 123 3
L 5550 123 7B L 5750 103 4
L 5700 L 5550 123 3A
L 5550 123 7D L 5750 103 X
Read this manual carefully before installing, operating or
servicing this equipment.
IMPORTANT
• Ensure that only a qualified electrician installs/services this
equipment.
•
• Ensure that power supply voltage does not exceed maximum
voltage rating of reel.
•
• Ensure that all electrical power is removed from reel before
servicing.
•
• A high-tension spring assembly is contained within the reel.
Exercise extreme caution.
•
• Check for frayed and/or broken wires before each use. Pull
electrical cord from reel by grasping the electrical cord itself,
not the work device.
•
• If an electrical malfunction should occur, remove power from
reel immediately.
• Ensure that reel, electrical cord, and equipment being serviced
are properly grounded. Use an ohmmeter to check ground
continuity.
•
• If reel ceases to unwind or rewind, remove power immediately.
Do not pull or jerk on electrical cord!
•
• Treat and respect the reel as any other piece of machinery,
observing all common safety practices.
•
• All cord reels with flying leads must be hard wired into the
electrical circuit to ensure proper function.
•
WARNING: Even low voltage can cause irreparable damage or
death! Exercise extreme caution while operating or servicing this
equipment.
SAFETY
Personal injury and/or equipment damage may result if proper safety
precautions are not observed.
Form# 565-291 Rev: 11/2013
Voltage
AMPS
Frequency
125
13
60 HZ Single Phase
125
15
60 HZ Single Phase
600
16
60 HZ Single Phase
125
20
60 HZ Single Phase
125
30
60 HZ Single Phase
Electrical Information