Reelcraft Series LPD80000 Stainless Steel Hose Reels - Manual

Personal injury and/or equipment damage
may result if proper safety precautions are
not observed.
• Ensure that reel is properly installed
before connecting input and output
hoses.
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line,
ensure that pressure does not exceed
maximum working pressure rating of
reel.
• Remember, even low pressure is very
dangerous and can cause personal in-
jury or death.
• Be aware of machinery and personnel
in work area.
• If a leak occurs in the hose or reel, re-
move system pressure immediately.
• A high tension spring assembly is con-
tained within the reel. Exercise extreme
caution.
• Pull hose from reel by grasping the
hose itself, not the control valve.
• If reel ceases to unwind or rewind,
remove system pressure immediately.
Do not pull or jerk on hose!
• Treat and respect the hose reel as any
other piece of machinery, observing all
common safety practices.
Operating Instructions
Series LP80000 / LPD80000
Stainless Steel Hose Reels
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 1163-1104 Rev: 7/2013
LP82000 OLS LP83000 OLS
LPD83000 OLS LPD84000 OLS
Dimensional Data
Personal Safety
IMPORTANT
Read this manual carefully before installing,
operating or servicing this equipment.
Part # A B D E F
LP82000 OLS 25 3/8” 24” 6” 15 3/8” 8 1/8”
LP83000 OLS 25 3/8” 24” 6” 15 3/8” 8 1/8”
LPD83000 OLS 25 3/8” 24” 7 7/8” 17 3/4” 10 3/8”
LPD84000 OLS 25 3/8” 24” 7 7/8” 17 3/4” 10 3/8”