SaltDogg WB200B v.1 - Manual (Page 3)

3
TM
I. Set the Restrictor
Plate Fully Open and
the Control Handle to
"30" (as shown)
Figure 5 Figure 6
Figure 7 Figure 8
F. Attach Control Handle
Assembly to Frame Using
M6x40 Bolts
G. Remove Control
Handle from Assembly,
Insert Upper Linkage into
Control Handle, Reattach
Control Handle
J. Attach Rear Deflector
Using M6x20 Bolts
H. Thread First Jam Nut onto
Upper Linkage and Insert Linkage
into Control Plate Assembly
Secure Linkage with Second Jam Nut and Tighten
First Jam Nut
Step E
Attach Control Plate Assembly
To Frame Using M6x40 Bolts
This End Of Rod To
Be Facing Upward
Rod To Be Flat (Parallel
With Ground)