ADC UltraWave Micro BTS - Manual (Page 2)

6/08
•
106405AE
UltraW
A
VE
Micr
o
BTS
UltraWAVE Micro BTS
GSM Base Transceiver Station
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Features:
Available in 850, 900, 1800 and 1900 MHz frequency bands •
Frequency hopping •
Sectorization •
General Packet Radio Service (GPRS) supported (CS-1, CS-2, CS-3, CS-4) •
Dynamic power control (uplink and downlink) •
Significantly improved BTS sensitivity: -114 dBm (optimal combining diversity) or -111 dBm (no diversity) •
Remote monitoring: Temperature, fan, power supply (PSU), power amp, VSWR can be monitored from •
central office enabling remote diagnosis and quick recovery
External alarms for third party equipment •
Optional redundant power supply with PSU failure alarm support •
Integrated full rack solution available: UltraWAVE integrated with additional on-site equipment such •
as transmission, battery backup, etc. in one rack
Common hardware modules: single slot TRX, processor card, RF module •
GSM EFR voice codec •
The Micro product line provides a compact and cost-effective platform, which helps lower the cost
of network ownership. They are easy to upgrade or repair in the field and provide a range of new
monitoring and control functions. The UltraWAVE Micro BTS supports up to six TRXs in one chassis.
With a single compact chassis, it can support an S222 site. It has the industry leading power amplifier
at 50 Watts when configured for 850 and 900 MHz and at 40 Watts when configured for 1800 and
1900 networks. Micro supports all the key BTS features, such as frequency hopping, sectorization, and
GPRS. It provides sufficient capacity for rural and urban coverage (up to S222) and is flexible enough
to scale from O1 to S222 supporting the popular BTS configurations, S111 and S222. It increases the
BTS coverage with industry leading power output (50W measured at antenna port without combining).
Receive sensitivity with antenna diversity is up to -114 dBm. Designed for easy expansion of the BTS
capacity, the Micro BTS is field upgradable. Operators can start with a small system and pay as they go
to add capacity.
The Micro BTS is designed for low cost maintenance with remote monitoring, external alarms,
overheating protection, redundant power supply, field replaceable modules, and easy front access.
It can reduce the on-going operation expenses for the operators. An integrated turn-key BTS package
option is available with transmission, battery, and other site equipment.