Versa-Matic VDA10 Metallic and Non-Metallic Surge Dampeners - Manual (Page 6)

Models VDA05, VDA07, VDA10 Page 4 vda050710sdsm-rev0512
ITEM PART TOTAL
NO. NUMBER DESCRIPTION RQD.
1 196-161-552 Chamber, Outer 1
196-161-520 Chamber, Outer 1
196-161-542 Chamber, Outer 1
196-171-110 Chamber, Outer (VDA05 Metallic only) 1
196-171-157 Chamber, Outer (VDA05 Metallic only) 1
2 360-099-360 Gasket, Spacer 1
3 334-103-552 Flange, Threaded ½" NPT (VDA05) 2
334-103-542 Flange, Threaded ½" NPT (VDA05) 2
334-103-600 Flange, Threaded ½" NPT (VDA05) 2
334-109-110 Flange, Threaded ½" NPT (Metallic VDA05 only) 2
334-109-150 Flange, Threaded ½" NPT (Metallic VDA05 only) 2
334-104-552 Flange, Threaded ¾" NPT (VDA07) 2
334-104-542 Flange, Threaded ¾" NPT (VDA07) 2
334-104-600 Flange, Threaded ¾" NPT (VDA07) 2
334-107-552 Flange, 1" ANSI (VDA10) 2
4 135-022-115 Bushing, Reducer 2
5 196-166-552 Chamber, Inner 1
6 720-058-600 Seal, Flange 2
720-063-600 Seal, Flange (Metallic VDA05 only) 2
7 286-097-600 Diaphragm 1
8 171-064-115 Capscrew Hex Flange 5/16 -18 x 1.50 8
171-064-308 Capscrew Hex Flange 5/16 -18 x 1.50 8
170-029-330 Capscrew, Hex Flange 5/16 x 1.50 (Metallic VDA05 only) 4
9 544-005-115 Nut 5/16 Hex Flange Nut 5/16-18 10
544-005-308 Nut 5/16 Hex Flange Nut 5/16-18 10
545.004-330 Hex Flange Nut (Metallic VDA05 only) 10
10 171-070-115 Capscrew Hex Flange 5/16 -18 x 3.00 6
171-070-308 Capscrew Hex Flange 5/16 -18 x 3.00 6
171-070-330 Capscrew, Hex Flange (Metallic VDA05 only) 2
11 171-069-115 Capscrew Hex Flange 5/16 -18 x 2.5 2
171-069-308 Capscrew Hex Flange 5/16 -18 x 2.5 2
171-069-330 Capscrew, Hex Flange (Metallic VDA05 only) 2
12 538-002-115 Nipple 1/8 NPT 1
13 020-039-000 Regulator W/Gauge 1
14 170-045-330 Capscrew Hex Flange (VDA05 Metallic Only) 5/16 -18 x 1.25 4
15 900-004-330 LockWasher (VDA05 Metallic Only) 14
16 901-038-115 Flat Washer (Non-Metallic Only) 2
Repair Parts shown in bold face (darker)
type are more likely to need replacement
after extended periods of normal use. They
are readily available from most Versa-Matic
distributors. The pump owner may prefer to
maintain a limited inventory of these parts
in his own stock to reduce repair downtime
to a minimum.
IMPORTANT: When ordering repair parts
always furnish pump model number, serial
number and type number.
MATERIAL CODES
The Last 3 Digits of Part Number
000... Assembly, sub-assembly; and some
purchased items
110... CF*M (316) Stainless Steel
115... 302/304 Stainless Steel
157... 380/383 Die Cast Aluminum
308... Stainless Steel; Black PTFE Coated
330... Zinc Plated Carbon Steel
360... Nitrile Rubber. Color coded: RED
520... Injection Molded PVDF, Natural Color,
542... Nylon
552... Polypropylene
600... Virgin PTFE
©Copyright 2011 Versa-Matic. All rights reserved.
Model VDA05 ½" Surge Dampener
Model VDA07 ¾" Surge Dampener
Model VDA10 1" Surge Dampener
REPAIR PARTS LIST