Ross Controls POPPET SERIES 84 - Manual (Page 7)

10
© 2012, ROSS CONTROLS ® . All Rights Reserved.
Both single and dual interposed regulators are available for SAE
sizes 125 and 250.
A regulator is sandwiched between the valve and sub-base or
manifold station and the valve is then bolted through the regulator
to the sub-base or manifold station with the longer bolts provided.
Single pressure regulators supply the same regulated pressure at
both outlet ports. Dual pressure regulators allow the pressure at each outlet port to
be set independently.
Use dual pressure regulators with 80 Series valves only. When using
dual pressure regulators, the valve must be externally piloted.
Regulated pressure range:
10 – 130 psig (regulator-to-base gasket included).
1.47 (37.3)
1.47 (37.3)
2.5 (63.5)
2.5 (63.5)
16.5
(419.1)
11.0
(279.4)
8.63
(219.1)
6.19
(157.2)
SAE Size 125 – Dual: 873H91
SAE Size 250 – Dual: 816H91
SAE Size 125 – Single: 593K91
SAE Size 250 – Single: 595K91
Accessories
Interposed Regulators