Ross Controls MODULAR GENERAL PURPOSE SERIES CP User Manual
Series cp, cx solenoid pilot controlled valves, 3/2 valves
6
© 2010, ROSS CONTROLS
®
.
All Rights Reserved.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
Series CP, CX Solenoid Pilot Controlled Valves
STANDARD SPECIFICATIONS:
For Series CP, CX Solenoid Pilot Controlled Valves.
Pilot Solenoid: AC or DC power. Rated for continuous duty.
Voltage and hertz ratings shown on pilot housing.
Standard Voltages: 24 volts DC; 120 volts AC 50/60 Hz.
Power Consumption:
2/2 Valves, NC & NO with 1/2” and 1” inlet, 3/2 Valves NC & NO
with 1/2” inlet: 3 VA on AC; 2.5 watts on DC.
2/2 Valves NC & NO with
1/2” and 21/2” inlet, 3/2 Valves NC & NO
with 1” inlet: 36 VA inrush, 23 VA holding on AC; 15 watts on DC.
Ambient Temperature: 40° to 120°F (4° to 50°C).
Media Temperature: 40° to 175°F (4° to 80°C).
Flow Media: Filtered air; 5 micron recommended.
Inlet Pressure: Vacuum to 145 psig (10 bar), (vacuum service
requires external pilot supply).
Pilot Pressure: 30 to 145 psig (2 to 10 bar). Must be equal
to or greater than inlet pressure. For vacuum service models
requiring external pilot supply, a pilot pressure of at least 30 psig
(2 bar) is required.
Override: Standard on 2/2 valves, 3/8” thru 1” bodies and 3/2
valves, 3/8” and 1/2” bodies. Non-Locking.
Port Threads: NPT standard, BSPP.
Note: For liquid applications, consult ROSS.
Single Solenoid Pilot Controlled, Spring Assisted Air Return
2/2 Valves
1/2” & 1” bodies
Normally Open (NO)
1/2” & 1” bodies
Normally Closed (NC)
1
1/2” & 21/2” bodies
Normally Open (NO)
1
1/2” & 21/2” bodies
Normally Closed (NC)
1
2
1
2
1
2
1
2
Port Sizes
Valve Model Number*
Avg.
Dimensions inches (mm)
Weight
1
2
NC
NO
C
V
Length
Width
Height NC
Height NO
lb (kg)
1/2 3/8
CP14NA37101W CP24NA37101W
3.5
3.83 (97.3) 2.83 (71.9)
2.85 (72.4)
2.85 (72.4)
1.4 (0.6)
1/2 1/2
CP14NA47101W CP24NA47101W
3.5
3.83 (97.3) 2.83 (71.9)
2.85 (72.4)
2.85 (72.4)
1.4 (0.6)
1
3/4
CP16NA57101W CP26NA57101W
12.3
4.16 (105.7)
3.45 (87.6)
5.63 (143.0)
5.63 (143.0)
3.5 (1.6)
1
1
CP16NA67101W CP26NA67101W
12.3
4.16 (105.7)
3.45 (87.6)
5.63 (143.0)
5.63 (143.0)
3.5 (1.6)
11/2 11/4 CP18NA77101W CP28NA77101W
44.9
5.37 (136.6) 5.00 (127.0)
8.52 (216.4)
8.86 (225.0) 10.0 (4.6)
11/2 11/2 CP18NA87101W CP28NA87101W
44.9
5.37 (136.6) 5.00 (127.0)
8.52 (216.4)
8.86 (225.0) 10.0 (4.6)
21/2 2
CP10NA97101W CP20NA97101W
100
6.35 (161.3) 6.75 (171.5) 10.40 (264.1) 10.73 (272.5) 19.5 (8.9)
21/2 21/2 CP10NA07101W CP20NA07101W
100
6.35 (161.3) 6.75 (171.5) 10.40 (264.1) 10.73 (272.5) 19.5 (8.9)
3/2 Valves
1/2” body
Normally Open (NO)
1/2” body
Normally Closed (NC)
1” body
Normally Open (NO)
1” body
Normally Closed (NC)
1
2
3
1
2
3
1
2
3
1
3
2
Port Sizes
Valve Model Number*
Avg.
Dimensions inches (mm)
Weight
1
2
NC
NO
C
V
Length
Width
Height NC
Height NO
lb (kg)
1/2 3/8
CP34NA37101W CP44NA37101W
3.5
4.57 (116.1)
2.83 (71.9)
2.85 (72.4)
2.85 (72.4)
1.8 (0.8)
1/2 1/2
CP34NA47101W CP44NA47101W
3.5
4.57 (116.1)
2.83 (71.9)
2.85 (72.4)
2.85 (72.4)
1.8 (0.8)
1 3/4
CP36NA57101W CP46NA57101W
12.3
5.00 (127.0)
3.45 (87.6)
6.33 (160.8)
6.99 (177.5)
5.3 (2.4)
1
1
CP36NA67101W CP46NA67101W
12.3
5.00 (127.0)
3.45 (87.6)
6.33 (160.8)
6.99 (177.5)
5.3 (2.4)
* For models with external pilot supply, replace shaded “1” in the model number with a “5”, e.g., CP14NA37501W.
For BSPP threads, replace “N” in the model number with a “D”, e.g., CP14DA37101W.
For 120 volts AC, 50/60 Hz, replace suffix “W” with “Z”, e.g., CP14NA37101Z.
Electrical connectors not included, see page 7 for ordering information.
Models for vacuum, liquid or leak tight construction: for 2/2 valves replace prefix “CP” with “CX”, e.g., CX14NA37101W;
for 3/2 valves, consult ROSS.