Wiegmann Non-Metallic Series User Manual
Page 46
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
F E AT U R E S - S P E C I F I C AT I O N S
Applications
Designed to protect electrical and
electronic controls, components, and
instruments in typical industrial environ-
ments. Enclosures protect enclosure
equipment from dust, dirt, oil, and
dripping water. These enclosures
are used in machine tool applications
for housing motor starters, drives,
contactors, PLC’s, as well as a wide
variety of other electrical and elec-
tronic equipment. The addition of 19-
inch rack mounting accessories make
these enclosures ideal for providing
rugged protection for sensitive rack
mounted components in harsh indus-
trial environments. The enclosures are
found extensively in automotive, pulp
and paper, wood products, textile,
and similar industries.
Two styles are available to provide
maximum flexibility:
a) Single Door Single Access
(single door on front)
b) Two Door Single Access
(two door on front)
Industry Standards
UL 508, Type 12
CSA Certified, Type 12
NEMA/EEMAC Type 12
UL Files E64791
CSA File LL66078
Construction
• Fabricated from 12 or 10 gauge
steel 304 stainless steel
• Continuously welded seams ground
smooth, less holes or knockouts
• Body stiffeners for added rigidity
• Heavy duty lifting eyes for easy
handling
• Heavy gauge continuous hinges
support each door
• 3 point latching mechanism with an
oil-tight key locking handle is provided
• Print pocket is provided
• “Uni-strut” mounting channels are
welded horizontally to interior body
sides and top, bottom and center
to allow optional back panels to be
positioned in enclosure. Optional
swing, half, full and rack panels
can be mounted anywhere along
unistrut channel
• Doors are sealed with poured in
place polyurethane gasket
• Stiffeners are welded to back of two
door enclosures to maintain flat-
ness and increase rigidity
• Grounding provisions provided
Finish
• All external surfaces have a smooth
brushed finish, interior has a stan-
dard commercial finish
• Optional back panels are white
polyester powder (See pages
I8-I13)
• Optional “G” panels have a con-
ductive finish (See pages I8-I13)
Accessories
• Sub panels (see pages I8-I13)
• Accessories (see pages J1-J22)
WA604818FSDSS
W A - F S S S & W A - F S D S S S E R I E S E N C L O S U R E S
N E M A 1 2 S TA I N L E S S F R E E S TA N D I N G
E46