Wiegmann WPG Series User Manual
Page 36
E N V I R O N M E N TA L C O N T R O L S
W A F M P S E R I E S FA N M O U N T I N G P L AT E
K36
F E AT U R E S - S P E C I F I C AT I O N S
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
C ATA L O G N U M B E R
FA N , F I LT E R & L O U V E R
FA N *
L O U V E R K I T
FA N
M O U N T I N G P L AT E K I T
PA I N T E D * *
G U A R D * * *
WA F M P 4
WA 4 A X F N
WAV K 0 6 0 6
WA G A R D 4
WA F M P 4
WA 4 A X F N 2
WAV K 0 6 0 6
WA G A R D 4
WA F M P 6
WA 6 A X F N
WAV K 0 8 0 6
WA G A R D 6
WA F M P 6
WA 6 A X F N 2
WAV K 0 8 0 6
WA G A R D 6
WA F M P 1 0
WA 1 0 A X F N
WAV K 0 8 1 2
WA G A R D 1 0
WA F M P 1 0
WA 1 0 A X F N 2
WAV K 0 8 1 2
WA G A R D 1 0
W A F M P S E R I E S FA N M O U N T I N G P L AT E
Fan Mounting Plate
Description
Designed to mount a fan and louver
kit together. This fan mounting plate
kit consists of a fan mounting plate,
filter and all necessary hardware for
installation. When ordering a fan
mounting plate, you will need to
order a fan, louver kit and a fan
guard. Fans, louver kits and fan
guards must be ordered separately.
*See page K26 for information on fans.
**See page K27 for information on louver kits.
***See page K26 for information on guards.
Notes:
Installation Instructions:
1. Make sure that the proper kits have been ordered.
2. Locate and mark holes and cutout per louver kit
instructions on page K27-K28.
3. Assemble kits as shown in figure 1.
4. After installation is complete, make sure that no
hardware interferes with any internal or external
equipment.
Note: Fan guard, fan
and louver plate are
not included in kit.
Order separately.
WAFMP4