Maple Systems OMI5100A-CE - Manual (Page 5)

1 1010-1012 Rev 02
Maple Systems 1010-1012 Rev 01 www.maplesystems.com
Introduction
Welcome
Welcome to the Maple Systems' OMI5000 Series of Open HMIs. This powerful family of Open HMIs can
be configured with Windows CE compatible HMI software, such as WebStudio, to connect to
programmable logic controllers (PLCs) and motion controllers to provide the human-machine interface in
industrial applications. This manual explains the operation of the OMI5000 Series. For information
concerning the installation of the OMI5000 series HMI, please consult the OMI5000 Series Installation
Guide that is included with each unit.
About Your Documentation
Conventions
In most cases, we will describe each method when the task is first discussed. The menu method is then
used whenever the task is used in later procedures. Other conventions used in this book are listed in the
following table.
Convention Meaning
Bold Characters that you must type exactly as they appear. For example, if you are directed
to type a:\setup, you should type all the bold characters exactly as they are printed.
Italic Placeholders for information you must provide. For example, if you are directed to type
filename, you should type the actual name for a file instead of the word shown in italic
type. Italics are also used to indicate a glossary term.
ALL CAPITALS Directory names, file names, key names, and acronyms
KEY1+KEY2 A plus sign (+) between key names means to press and hold down the first key while you
press the second key.
click When referring to the touch screen, click means to tap icon onscreen once with either a
finger or stylus. When referring to a computer with a mouse, click refers to clicking the
left mouse button once.
Double-click When referring to the touchscreen, this refers to quickly tapping an onscreen icon twice
in rapid succession with either a finger or a stylus pen. When discussing a computer with
a mouse, refers to quickly clicking the primary mouse button (usually the left mouse
button) twice.
Right-click Refers to clicking the secondary mouse button (usually the right mouse button) once.
Right-clicking usually opens shortcut menus.
The following terminology will be used when referring to computers and PCs:
Term Meaning
Open HMI Refers to the OMI5000 Series Open HMI
PC Refers to a desktop PC