Maple Systems HMI5000HD - Manual

1 HMI5000HD Installation Guide
1010-1019 Rev 01 www.maplesystems.com
Introduction
Thank you for purchasing a Maple Systems HMI5000HD non-display
HMI with HDMI port. The HMI5000HD is configured using the
EZwarePlus software (purchased separately). This booklet describes the
steps necessary for installing the HMI5000HD.
For information on programming and configuring the HMI5000HD,
please refer to the EZwarePlus Programming Manual available on the
EZwarePlus software CD. For additional information, please refer to the
Support Center section on our website,
www.maplesystems.com . The
Support Center provides links to manuals, FAQs, technical notes,
training videos, sample projects, controller information sheets, and
controller cables.
Static Awareness
Do NOT remove the cover of your HMI5000HD Series product – doing
so will void your warranty. When the cover is removed the circuitry
inside is exposed to possible damage by electrostatic discharge during
handling. Minimize the possibility of electrostatic discharge by:

Discharging personal static by grounding yourself prior to
handling the HMI.

Handling the HMI at a static-free grounded workstation.

Connecting the frame ground ( ) connector of the HMI to a
clean earth ground.

Placing the HMI in an antistatic bag during transport.
HMI5000HD
Installation Guide