Maple Systems OIT Family - Manual (Page 64)

2. In the PLC Interface group box, select the PLC Register and Address to be monitored.
3. In the PLC Interface group box, select the Format used in the selected PLC register.
4. In the Low Set Point group box, enter the Low Limit (trip point).
5. In the Low Set Point group box, enter the Screen to display upon low limit violation.
NOTE:Choose the VIEW button to view the selected screen.
6. In the High Set Point group box, enter the High Limit (trip point).
7. In the High Set Point group box, enter the Screen to display upon high limit violation.
8. Choose the Add To Set Points List button to create the set point. The new set point
appears in the Set Points List group box.
NOTE:The Set Points List group box is used to view or remove existing set points.
PLC Register Monitors 64
1010-0099, Rev. 06