Proface AGP3300H - 5.7 Handheld HMIs" - Manual (Page 3)

3
General Specifications
„ Electrical Specifications
„ Environmental Specifications
Po
wer Supp
ly
Input Voltage DC24V
Rated Voltage DC19.2 to 28.8V
Allowable
Voltage Drop
2ms (max.)
Power
Consumption
13W (max.)
In-Rush
Current
60A (max.)
*1
*1 The FWHM (Full-width, half maximum) value is approximately 40µs. (When exceeding 30A)
Voltage Endurance AC1000V 20mA for 1minute (between charging and FG terminals)
Insulation Resistance DC500V 10M
Ω (min.) (between charging and FG terminals)
Phy
s
ic
al
Surrounding Air
Temperature
0 to +50
°C *1
*1 When using AGP3200-A1-D24 in an environment where the temperature becomes or exceeds 40°C
for an extended period of time, the screen contrast level may decrease from its original level of
brightness.
Storage
Temperature
-20 to +60
°C
Ambient Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Storage Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Dust 0.1mg/m 3 and below (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment.