Proface AGP3300H - 5.7 Handheld HMIs" - Manual (Page 2)

2
Part Names and Functions
Name Description
A Status LED
B Power Connector (Socket) -
C USB Host Interface (USB)
USB1.1 Host I/F
Connector: USB TYPE-A x 1
Power supply voltage: 5VDC±5%
Output current: 500mA (max.)
The maximum communication distance: 5m
D Serial Interface (COM1)
Dsub 9-pin plug type. RS232C, RS422, and RS485 are
switched by software.
E Ethernet Interface (LAN)
10BASE-T/100BASE-TX
This interface uses an RJ-45 type modular jack
connector (8 pins).
Front
A
Rear
E D
B
C
Bottom
LED
GP Status
Green (lit)
Normal operation (power is ON.) or
OFFLINE operation.
Orange
(blinking)
During software startup.
Red (lit) When power is turned ON.
Not lit Power is OFF.