Proface GP4300R - 5.7 Standard HMI with Rear Mount" - Manual

Datasheet
©2013 Pro-face. All rights reserved. Specifications may change without notice.
5.7" Touch Screen Operator Interface with Rear Mount Options
TouchPanel
Operation
Features:
• Lack of front bezel allows for multiple Rear
Mounting Options
• 65,536 Colors, Clear, Bright, High-Resolution TFT
Display
• Energy Effecient LED Display
• No Grid Analog Touch Panel for Improved Visibility
and Precise Part Placement
• Supports Up to Four Protocol Drivers
Simultaneously
• High Speed Application Transfer, 10 Times Faster
than Conventional Operator Interfaces
• 10/100 Base-T Ethernet, USB, Serial
Communication, and SD Card Interfaces
• High-Definition Part Images and Multi-Language
Support
Specifications
Model PFXGP4301TADR, PFXGP4301TADRF0C
Graphics Display Resolution 320 x 240 pixels (QVGA)
Display Type and Size TFT Color LCD (5.7 inch)
Display Colors 65,536 Colors (no blink), 16,384 (blink)
Display Area W115.2 x H86.4 mm [W4.54 x H3.40 in.]
Touch Screen Resistive film analog 1024 x 1024 resolution
USB USB Type-A (2.0) x 1 , USB mini-B (2.0) x1
SD Card SD Card slot x 1 (maximum 32 GB SD/SDHC Card)
Serial COM1: RS-232C Asynchronous Transmission Data Length: 7 or 8 bit, Parity: none, odd or
even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector:
D-Sub9 (plug)
COM 2: RS-422/485 Asynchronous Transmission Data Length: 7 or 8 bits, Parity: none, Even or
Odd Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI)
Connector: D-Sub9 (plug)
Ethernet IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular jack (RJ-45) x 1
Backlight White LED (User nonreplaceable parts. When replacement is required, contact your local
distributor.)
Brightness and Contrast Controls 16 levels of adjustment available via touch panel
Application Memory 16MB FEPROM (GP-Pro EX V3.0 or later)
Backup Memory 512kb SRAM with battery backup
5.74-inch TFT Color Rear Mount
Touch Screen Operator Interface
GP-4301TADR
Model: PFXGP4301TADR, PFXGP4301TADRF0C
General Specifications
Model PFXGP4301TADR PFXGP4301TADRF0C
Conformal Coating No Yes
Input Voltage Rated 24 Vdc/(Limits 19.2 to 28.8 Vdc)
Power Consumption 10.5 W or less
Ambient Operating Temp. 0°C (32°F) to 55°C (131°F)
Storage Temperature -20 to 60 °C [-4 to 140 °F]
Altitude Endurance 800hPa to 1114hPA (2000 meters or lower)
Certifications CE, UL Listed Cl 1 Div 2 (Cl 1 Div 2 is only available on Rev. B units),S RoHS, ABS (American Bureau of Shipping), DNV (Norway – Marine)
Humidity - Ambient/Storage 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] or less - no condensation.)
Noise Immunity Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns (via noise simulator)
Cooling Method Natural air circulation
Electrostatic Discharge Immunity Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Vibration Resistance IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (approx. 100 min)
Shock during operation IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Rating Equivalent to IP65f, Nema #250 Type 4x/13 (Equivalent to NEMA 12 with the addition of “Oil or Spraying and Splashing”) when properly installed in an enclosure
Weight 1 kg [2.2 lb] or less (including the installation fasteners)
External Dimensions W155.6 x H123.4 x D59.7 mm [W6.13 x H4.86 x D2.35 in.]
Warranty Two-year standard (maximum 4 years)
SD Card Ethernet
24Vdc
QVGA 5.7
-inch
Ro
Powered by