Proface LT3200 - 3.8 All-in-One HMI" - Manual (Page 3)

-3-
A B L D R M 0 3 0 2 4
72mm[2.83]
100mm[3.94]
60mm[2.36]
70mm[2.76]
59.5mm[2.34]
55mm[2.17]
27.5mm [1.08]
35mm [1.38]
90mm[3.54] 110mm[4.33]
44mm[1.73]
15mm[0.59]
27.5mm [1.08]
V Out N L + +
Input
10 0 - 240VAC
Out put
24VDC -1.3A
1
1
2
A B L D R M 0 3 0 2 4
V Out N L + +
Input
10 0 - 240VAC
Out put
24VDC -1.3A
1
2
1
2
Dimensions 1
Installation
2
„ „ „ „ „ Direct Panel Installation
Create two attachment screw holes using the dimensions shown below, and posi-
tion this product so that its product attachment tabs (Top and bottom) align with
the attachment screw holes. Secure the product in place using M4 attachment
screws, using a torque of 1 N•m. For the efficient use of the ABL-DRM03024,be
sure to install this product as shown below.
„ „ „ „ „ DIN Rail Installation
Confirm that the DIN rail fastener hook is clipped in place and the module is held securely.
Installation
Removal
100
+0.2 -0.2
[3.94 ]
+0.01 -0.01
When attaching the ABL-DRM03024 to a panel, extend the product’s attach-
ment tabs. When attaching the ABL-DRM03024 to a DIN rail, retract the
product’s attachment tabs.
snap
M4 × 20
2-M4
7.5[0.30]or more
[2.36 ]
+0.01
-0.01
60
+0.2
-0.2
Unit: mm [in.]
Unit: mm[in.]
Unit: mm [in.]